Sel, Taşkın Erken Uyarı Sistemi, Anti-Flood, Water Flood Sensor and Relay System

sel,takın erken uyarı sistemi,,anti-flood ,water flood sensor and relay systems

Main Usage Areas;
 In every environment that is not flammable and explosive;
In residences;
 Pipe bursts or faucets left open and water In every environment where there is a risk of pressing, bathroom, kitchen, etc. as in places…
In nature;
 Streams and flood beds with potential flooding and
flood risk
 In coastal areas with tsunami potential
In industrial & agricultural environments;
 in water wells
 Liquid & Water Tank level control
 Liquid Pump pumping stations
 In waste water treatment plants
 water purification systems
 in drainage wells
...
monitoring and early warning control, control of valves or taps via solenoids can be provided.

Wired and wireless main control systems of the sensors are available. Warnings can be sent to users via the main control system and users can control the solenoids if necessary via the main control system.


Level control; In large and small storage tanks, level control operations are of great importance to prevent water overflow or to keep the level within the desired limits.
FLRC-04 can be used safely in this area as well.

The sensitivity setting on the DCS FLRC-04, it can easily be used in various conductive liquids.

DCS FLRC-04 does not apply a signal to the liquid to prevent electrolysis from occurring in liquids.

DCS FLRC-04 How to use in the field; Automatic control is achieved by sending a signal to the solenoid valve coil or the motor contactor with the relay output.

In addition, if necessary, it is possible to receive signals or light warnings via additional relays for alarm purposes. It is possible to control this circuit manually with an additional button.

Technical data ;
Operating Voltage: Please see device labels (220 VAC - 12- 24
VAC, 12-30VDC 3A)
Operating voltage range: 150-300V AC Operating frequency: 50 Hz
Power consumption (Max): 2.5VA
Upper - Lower electrode sensitivity setting: Adjustable (0 - 100
KOhm)
On - Off delay: 1sec fixed Setting accuracy: + or -5% Output Relay: 5A 250V AC
Working temperature: -10 ° C ... 50 ° C Cable Cross Sections: 2.5 mm2 multi core Mounting Type: Rail type, to the clamp rail Protection Class: IP20

Warnings for Safe Use and Installation;
If the following safety conditions are not observed can result in injury and death situations may arise.
-This relay cannot be used in flammable and explosive liquids.
-Check the cable connections before operating the device.
-Before any operation on the device,cut off all supply voltages.
-Do not remove the front panel while the device is connected to the mains.
-If you encounter a problem on the device contact your authorized dealer